Friedrich Wall Sleeve
Monday, September 6th, 2010|
|
HTTWS Haier Wall Air Conditioner Sleeve Includes Aluminum Grill $72.99 The Haier HTTWS Through-the-Wall Sleeve is an easy-to-install accessoy that is compatible with the HTWR08XC6, HTWR10XC6, HTWR10VC6, HTWR12XC6 and the HTWR12VC6. This wall air conditioner sleeve is designed to minimize heat loss. It reduces outdoor noise transmissions into the room and prevents sleeve condensation. It features an inside and outside metal cover and an architectural aluminum grill. Your air conditioning unit’s maintenance is improved as well. |
|
|
HTWR08XC6 Haier 8,000 BTU Wall Air Conditioner With Multiple Cool and Fan Settings $419.99 The Haier HTWR08XC6 8,000 BTU Wall Air Conditioner features through-the-wall installation that will last year after year. It features 8,000 BTUs of cooling power and an incredible 10.0 EER which makes it Energy Star qualified. The other amazing features included with the HTWR08XC6 are:Compact Chassis: The wall air conditioner is small enough to fit all existing wall openings from a previous air conditioner. Universal Trim Kit: The included kit allows the HTWR08XC6 to fits seamlessly into an existing sleeve. Easy Installation: Installs through the wall, which saves you the trouble of hauling an air conditioner back and forth every year. Full Function Remote Control: To control the settings from a distance, a wireless remote control is included. |
|
|
HTWR12XC6 Haier 11,600 BTU Wall Air Conditioner Includes Wireless Remote Control $519.99 The Haier HTWR12XC6 11,600 BTU Wall Air Conditioner is a through-the-wall air conditioner designed with your convenience in mind. It features 11,600 BTUs of cooling power and a 9.0 EER. The other amazing features included with the HTWR12XC6 are: Fits Existing Wall Openings: The unit has a compact chassis so it can fit any wall opening left by a previous air conditioner. Blends Into Your Home: The universal trim kit allows the through-the-wall air conditioner to blend into any home beautifully by fitting into an existing sleeve. Operates Quietly: The operation of the HTWR12XC6 is whisper quiet so that your environment is not disturbed. 3 Cool Settings, 3 Fan Settings: There are multiple cooling and fan-only settings so you can always set your unit to deliver the right amount of cooling. |
|
|
HTWR12VC6 Haier 12,000 BTU Wall Air Conditioner Includes a Universal Trim Kit $519.99 The Haier HTWR12VC6 12,000 BTU Wall Air Conditioner saves you the trouble of installing and uninstalling once the cooling season is over. One installation will last year after year with this through-the-wall air conditioner. It features an EER of 9.0 and is compatible with 208/230 volt outlets. Other benefits featured on the HTWR12VC6 include: Universal Trim Kit: Installation is easy because the included universal trim kit allows the HTWR12VC6 to fit perfectly into an existing sleeve. Fits Existing Wall Openings: Any wall openings from previous air conditioners can fit the compact chassis of this through-the-wall air conditioner. Digital Time and Temperature Display: The time and temperature are displayed digitally so that they are clear and easy to read. Includes Remote Control: Make adjustments to your unit without have to leave your seat with the included wireless remote control. |
|
|
9518 Air King Wall Mount Fan Includes Wall Mounting Bracket $119.95 Keep your spaces cooled and comfortable with the Air King 9718 18 inch wall mount fan! This wall mount fan can effectively cool down your facility with no problem because it features:Air King QualityAir King industrial fans are durable and designed in North America. Not only are they known for quality, but also for value. The 9718’s blade, guards, and mounts are made of powder coated steel.Motor BuildThe 9718’s motor is permanently lubricated and permanently split capacitor along with a 9’, 3-conductor type SJT power cord. The motor runs at 1/6 HP and 120 volts.Uses and ApplicationsUse the 9718 in your gym, health club, auditoriums, schools, churches, and all kinds of industrial space to save space and energy. The 9718 is wall mounted so that you do not need to use floor space, and fans are more energy efficient than traditional AC units.CapabilitiesThe 9718 can reach air deliveries of up to 3190 CFM and RPMs of 1500. It also can work at a maximum of 1.52 AMPs and 180 watts. On its highest setting, the 9518 emits 67 dBA. |
|
|
60460 Fire Sense Wall Mounted Infrared Patio Heater With Mounting Bracket $169.99 Experience quick heat in just seconds with the Fire Sense 60460 wall mounted infrared patio heater. This heavy-duty heater operates at 90 percent heating efficiency and runs on a regular household electric current. The 60460 is also economical and costs substantially less to operate than a standard LPG patio heater. EffectiveYou’ll experience 100 percent heat production within seconds with the Fire Sense 60460 wall mounted patio heater. It also features a 9 foot blanket of heat that’s not affected by wind.VersatileThis versatile wall mounted heater can be used indoors and outdoors. SafeBecause the Fire Sense 60460 runs on electricity, there are no harmful emissions or toxic residuals. Saves SpaceThis heater mounts onto a wall to save space. Also included is a moveable mounting bracket. |
|
|
CRA2024T2 Q-Mark Electric Wall Heater With 3 Piece Construction $119.99 Purchase a Q-Mark CRA2024T2 electric wall heater to defend yourself against cold weather! With a fast response coil element, this heater warms up quickly and requires very little maintenance, making it the perfect unit for your winter needs.Easy InstallationWith its three-piece construction, the QMark CRA2024T2 is easily put together and installed for quick and efficient heat!Built-In ThermostatThe CRA2024T2 wall heater features a built-in thermostat that allows you to adjust the temperature according to your needs.Clip-N-FlipThis electric wall heater from Q-Mark offers a patented Clip-N-Flip feature that allows you to change the wattage without moving the jumper wire!Saves SpaceThe CRA2024T2 is built to be recessed into the wall, so it won’t get in your way. |
|
|
LFK404 Q-Mark Electric Wall Heater With 4000 Watts $219.95 For easy and convenient installation, the Q-Mark LFK404 Electric Wall Heater has a three piece design and a Northern white louvered cover. The rugged stamped steel front cover provides a down-flow air pattern and is finished in Navajo white. There is a hole plug that is there to prevent tampering with the installation. Uniform heat and long service life is provided by the steel finned metal sheath electric heating elements with low sheath temperature. The Q-Mark LFK404 Electric Wall Heater is a high capacity, heavy-duty fan-forced wall heater. It can be used almost anywhere in residential, commercial or industrial areas and perform well in motels, entryways, playrooms, basements, workshops, garages, stores and other large areas. A two pole thermostat is included with the LFK404 electric wall heater so that you are able to turn the heater all the way off. There is also a built-in thermal cut out that disconnects power in event of overheating due to accidental blockage and a fan delay switch that energizes the fan only after the elements are heated to prevent unheated air from being discharged. The fan motor is also only de-energized after the residual heat has dissipated when the heat is shut off. The fan motor is permanently lubricated and totally enclosed to ensure long life, low maintenance and gently distribute warmth throughout room area. |
|
|
9046 Air King Wall Mount Fan With Steel Construction $83.99 The Air King 9046 Wall Mount Fan is a space saving and convenient way to cool during the summer months. It can be mounted on your wall in a convenient location and features a pull cord for easy operation. 3 Selectable SpeedsThere are 3 whisper quiet speeds included that can be used in combination with oscillation for a variety of cooling options. Quick InstallationThe 9046 includes mounting hardware that makes it easy to install. There are no tools required for installation so it is quick and easy. Durable ConstructionThe fan’s guard is made of powder coated steel and the propeller is made of polypropylene for long lasting operation.Remote ControlAll of the settings and options can be controlled by a convenient remote. |
|
|
CRA1512T2 Q-Mark Electric Wall Heater With 1500 Watts $119.99 For a heater that is suitable for almost any room, try the Q-Mark CRA1512T2 Electric Wall Heater. They have a patented Clip-N-Flip feature that allows the installer to change the wattage of the heater to a lower output without moving the jumper wire. This is useful because each heater is factory wired for its maximum wattage. Dual protection is present on the Q-Mark CRA1512T2 electric wall heater in the form of a thermal cutout with indicator light and a onetime thermal fuse. Also for your safety the heater is UL and CUL listed. It is designed for recessed installation and can also be semi-recessed or surface mounted on walls. You’ll need a surface mounting frame to surface mount. The Q-Mark CRA1512T2 Electric Wall Heater helps you defend your home against cold weather. For quick heat and low maintenance, this heater has a fast response coil element. Also, for ease of installation it has three piece construction. The European styling gives way to sleek rounded corners for an attractive setup in your home. It also has an elegant Northern white finish. |
|
|
CRA2224T2 Q-Mark Electric Wall Heater With 2250 Watts $119.99 For the safety conscious heater consumer, the Q-Mark CRA2224T2 Electric Wall Heater is perfect. Dual protection is present in the form of a thermal cutout with indicator light and a onetime thermal fuse. Also for your safety the heater is UL and CUL listed. It is designed for recessed installation and can also be semi-recessed or surface mounted on walls. You’ll need a surface mounting frame to surface mount. The Q-Mark CRA2224T2 Electric Wall Heater helps you defend your home against cold weather. For quick heat and low maintenance, this heater has a fast response coil element. Also, for ease of installation it has three piece construction. The European styling gives way to sleek rounded corners for an attractive setup in your home. It also has an elegant Northern white finish. The Q-Mark CRA2224T2 Electric Wall Heater can be used in almost any room in your home. They have a patented Clip-N-Flip feature that allows the installer to change the wattage of the heater to a lower output without moving the jumper wire. This is useful because each heater is factory wired for its maximum wattage. |
|
|
9016 Air King Wall-Mounted Fan In White with Impressive 1710 CFM $64.95 Wall mounted fans are an excellent solution to rooms that cannot afford anymore floor space. The Air King 9016 oscillating wall mount fan will make an excellent solution to your needs because it offers many features, including:90° of OscillationThis gives the 9016 enough range to cool any room. Its oscillating function also keeps air circulating, so that it would never go stale. Simply angle the fan to an appropriate position and enjoy a crisp breeze of air!CompositionThe 9016 features Air King quality construction. Its grills are created with quality and durability in mind. Its front steel is made of powder coated steel as its rear grill is made of impact resistant plastic.MotorAir King’s oscillating fans, like th 9016, feature a 120 volt permanently lubricated motor with a 3-conductor type SPT power cord. The 9016 operates with a 1/20 HP motor with both pull chain and front mounted rotary controls for your convenience.UsesUse the 9016 in workshops or workstations in your office or home, in health clubs or gyms, stores, classrooms, hospitals, and more! The 9016 can function anywhere as long as there is a wall to install it on! |
|
|
HGW-308R Soleus Wall Mounted Micathermic Heater Operates Silently $79.99 The Soleus HGW-308R Wall Mounted Micathermic Heater is the perfect space heater. Radiant heat and convection heat are combined to form an ideal technology to heat your home. Warmth is spread throughout a room quickly and the air is not dried out. Also because there is no noisy fan, the heater is silent and does no stir up any dust. To keep the HGW-308R micathermic heater out of your way, simply mounted it on the wall. You can also save energy and money by running it in the energy saving mode. A remote control is included so that you can control the heater from across the room. There is also a digital thermostat for precise temperature control. For your safety, the Soleus HGW-308R has an overheat safety feature. The heater automatically shuts off if the internal components reach a certain temperature. This heater also has a safety tip over switch so that you don’t have to worry about accidental tip overs. |
|
|
EF621C Dimplex 2,000 Watt Deluxe Wall Mounted Fan Heater With Built-In Thermostat and Timer – FREE SHIPPING! $269.99 Warm up chilly bathrooms, kitchens, hallways, and foyers with the EF621C deluxe wall mounted fan heater from Dimplex! This premium residential electric wall heater is ideal for areas where both primary and supplementary heat is required and features an attractive low-profile design that seamlessly blends in with your existing decor. The Dimplex 240/208 volt EF621C fan-forced wall heater also provides up to 2,000 watts of even, gentle electric heat. Built-In ThermostatRoom temperature is controlled automatically by the heater’s built-in thermostat. Also included is a 60-minute timer as well as frost protection settings. Heavy-Duty Fan MotorEnclosed within the Dimplex EF621C wall mounted heater is a heavy duty fan motor and molded plastic centrifical impeller fan. The two speed fan combined with the 60-minute timer provide increased heat when the timer is activated.Easy MountingThe Dimplex EF621C comes with an easy-mount wall bracket that installs in just minutes. Quiet OperationOther fan-forced wall heaters can be noisy, but the Dimplex EF621C boasts quiet performance that won’t disturb your indoor environment. Durable, Splash-Proof ConstructionThe EF621C features an attractively designed front cover that’s constructed of tough, durable 20 gauge galvanized steel. This ensures years of long-lasting performance. |
|
|
9012 Air King Wall-Mounted Fan In White with a 1/50 HP Motor $54.95 Wall mount fans provide cooling solutions to your home without breaking the bank. They also save floor space so that you can concentrate more on your home’s feng shui. Oscillating wall mount fans, such as the Air King 9012, offer you cooling without taking up too much space. The 9012 would make a great gift or purchase because of its:VersatilityThe compact 12� size makes it ideal for workshops, health clubs, stores, classrooms, offices, and hospitals where there is high foot traffic and not enough room on the floor.QualityBeing an Air King product, he 9012 offers quality and durability. Air King is an American company with reputable products, and the 9012 is no exception. Its blades are constructed from chemical resistant polypropylene and its motor runs as 120 volts.QuietnessEven at its highest setting the 9012 hums at 45 dBA. At its lowest setting it is at 36 dBA, making it ideal for offices or classrooms where there is a need for peace and quiet.ConstructionThe 9012 features 3 speeds; high, medium, and low as well as a powder coated steel front grill with an impact resistant plastic rear grill. It also includes a 7’ power cord to allow you more choices on where to install it. |
|
|
CWH88L Windchaser Remote Control Ceramic Wall/Floor Heater $69.95 This unique ceramic remote control heater can be used on the floor or mounted on the wall to save floor space and keep out of reach of children. The automatic oscillation louvers circulate the heat throughout the room. Designed with a ceramic heating element and automatic oscillation louvers, this versatile floor heater quickly warms chilled rooms in the winter. It can also be mounted low on the wall for use as a baseboard heater. The unit features two heat settings and an adjustable thermostat for efficiently maintaining a desired room temperature. Soft-touch controls and an LED screen make the unit easy to use, while its 7-1/2-hour shut-off timer and full-function remote control provide efficiency and exceptional convenience. For summer ventilation, the unit’s fan can be used without heat. Other useful features include a power indicator light, a 6-1/2-foot power cord, and two removable feet for floor use. Whether in the bedroom, living room, or office, the versatile heater provides fast and flexible heating for the entire room. The heater carries a one-year limited warranty. |
|
|
LFK304 Q-Mark Electric Wall Heater With 3000 Watts $219.95 If you are looking for a heater that has a high capacity, is heavy-duty and fan-forced, look no further than the Q-Mark LFK304 Electric Wall Heater. It can be used almost anywhere in residential, commercial or industrial areas and perform well in motels, entryways, playrooms, basements, workshops, garages, stores and other large areas. Q-Mark LFK304 electric wall heaters have a three piece design for easy installation and a Northern white louvered cover. The rugged stamped steel front cover provides a down-flow air pattern and is finished in Navajo white. There is a hole plug that is there to prevent tampering with the installation. Uniform heat and long service life is provided by the steel finned metal sheath electric heating elements with low sheath temperature. A two pole thermostat is included with the LFK304 electric wall heater so that you are able to turn the heater all the way off. There is also a built-in thermal cut out that disconnects power in event of overheating due to accidental blockage and a fan delay switch that energizes the fan only after the elements are heated to prevent unheated air from being discharged. The fan motor is also only de-energized after the residual heat has dissipated when the heat is shut off. The fan motor is permanently lubricated and totally enclosed to ensure long life, low maintenance and gently distribute warmth throughout room area. |
|
|
TWH2031CW Dimplex 240/208V Fan Forced Wall Insert Heater With 200 Square Foot Coverage Area $99.99 Quickly and quietly heat up hallways, kitchens, entranceways, bathrooms, or any other area under 200 square feet with the Dimplex TWH2031CW! This 208/240 volt electric fan forced wall insert heater features a compact design with recessed body style that provides high output heat wherever space is limited. Flexible Installation OptionsThe Dimplex TWH2031CW wall heater features a low profile mounting box that can be installed either horizontally or vertically. Extremely QuietThis wall heater’s fan offers improved airflow, resulting in low front panel temperatures with significant noise reduction. Durable ConstructionThe Dimplex TWH2031CW wall heater is constructed of a powder-painted, 22-gauge steel front panel that resists fading and scratching. This heater will provide years of hassle-free service. Offers Powerful HeatThis heater offers up to 2000 watts of heat and covers areas up to 200 square feet. |
|
|
Stiebel Eltron CK 15E 120V Electric Wall Heater Features Elegant, Surface-Mount Design $149.99 Introducing the Stiebel Eltron CK 15E electric wall mounted fan heater – a breath of fresh air in electric heater design! This heater combines form and function in one impressive unit and is nice enough to sit out all year round. Featuring a surface-mount design with an elegant shape, this wall heater is great for heating up bedrooms, bathrooms, hallways, and kitchens. The Stiebel Eltron CK 15E 120 volt wall heater produces 1500 watts of heat and boasts a unique, curved body style that’s both visually appealing and efficient. For optimum heat distribution, this heater’s vent blows towards the ground and keeps cold floors warm and toasty. Additional features include a built-in thermostat for custom comfort control,pre-wired installation, and a steel/plastic body. |
|
|
9020 Air King Wall Mount Fan In Black with 1/6 HP Power $124.95 Need a powerful industrial grade fan for your gym, auditorium, schools, or churches? Invest in an Air King 9020 20� wall mounted fan to give you the fresh breeze of air you need! The 9020 is great because of these following reasons:Great MotorThe 9020’s motor is 1/6 HP strong at 120 volts. It has a totally enclosed ball bearing mechanism that is permanently lubricated and permanently split capacitor along with a 3’, 3-conductory type SJT power cord.Intense PowerThe 9020 can blast up to 3670 CFM of air to whichever direction you please. The 9020’s blades will rotate at 1500 RPM at its highest RPM. The 9020 also has three speed functions.UsesThe 9020 would make a great addition to large spaces that require ventilation and air circulation. It’s ideal for areas where there are large assemblies.Superb ConstructionThe 9020’s blade, guards, and mount is all constructed from powder coated steel. It is also made from a reputable company, Air King, who prides themselves in creating fans that can last a lifetime. |
|
|
Alen C535 comes with a window and wall kit ready to install. $599 Upgrade to the NewAir AC-12000E Portable Air Conditioner and Get More Cooling Power for Less!For superb performance at a great price you have to try the Alen C535. Built for medium sized rooms the C535 can deliver 1400 watts of cooling power strong enough for 535 square feet of room. If you take into consideration the area of coverage of such a unit and the price, you’ll find that this is one of the most affordable portable air conditioning units on the market.In addition to the cooling power of the C535, the unit also dehumidifies the air it processes. This unit by Alen Corp. removes 135 pints of water a day and has two ways of getting rid of the water. Water condensed from the air by the C535 can be stored in a internal removable bucket or if you like you can drain the water constantly by attaching a water hose to the unit.C535 portable air conditioner comes with an exhaust kit and a wall kit to vent the unit. These kits allow the AC to move the hot air from your room to another location with a hose and a way to push the heated air out the window. |
|
|
7500-1 Seabreeze Cool Sweep Portable Fan With Wall Mounting Capabilities $49.95 The Seabreeze 7500-1 Cool Sweep portable fan is your answer to quick and efficient air cooling during any season of the year. As a fan it also circulates air with its 4 louvers to keep your air feeling fresh and revitalized. The 7500-1 makes an awesome addition to your home or workplace because it features many great aspects, including:Sweeping PowerUsing only 88 watts of power, the 7500-1 Cool Sweep can sweep your air 45 times per minute, leaving it feeling crisp and new. This allows you to use the Cool Sweep during seasons where air can get stale.Perfectly BalancedThe 7500-1 Cool Sweep fan balances on a pivot so that it can be angled to any degree. It will also lock itself in position so that you don’t have to readjust it minute by minute. It also has a small footprint, and can be used on tabletops with ease.Mountable OptionThe Cool Sweep electric portable fan can be mounted on the wall and used as a permanent fixture. It can be a great addition to studios and workshops that require efficient and quick cooling.Variety of UsesAlthough most consumers would associate fan with cool and cold, the 7500-1 Cool Sweep also circulates air to keep it feeling fresh and new. You can use this fan during cooler seasons for its air sweeping properties. |
|
|
LFK484 Q-Mark Electric Wall Heater With a 400 Sq. Ft. Coverage Area $219.95 Get warm without giving up your space. The QMark LFK484 electric wall heater mounts to your wall so it stays out of your way. Its attractive white finish adds a clean, bright touch to any room. The LFK484 quickly heats spaces up to 400 square feet and is perfect for use in basements, rec rooms and family rooms, commercial offices, and more! Rugged construction and a permanently lubricated and sealed motor ensure a long life with low maintenance. The LFK484 is always watching out for you: its thermal safety switch shuts off the unit in the event of blockage or overheating. |
|
|
9018 Air King Wall-Mount Fan In White with Chemical Resistant Polypropylene Blades $69.95 Electric fans are a great way to get immediate and inexpensive relief from stuffy and hot weather. The Air King 9018 18 inch oscillating wall fan is the perfect way to save space and cool down for these following reasons:Three SpeedsThe 9018 operates on three varying speeds to let you relax under different air intensities. The 9018 also has a pull cord to let you power the fan with a simple tug.MotorThe 9018’s motor is permanently lubricated and runs at a steady 1/20 HP. It also is 120 volts and uses a 3-conductor type SPT power cord. The fan is also OSHA compliant.ConstructionAs all Air King products are made with American quality in mind, so is the 9018. The grills are constructed of a powder coated steel front grill with an impact resistant plastic rear grill. Its blades are made of chemical resistant polypropylene.CapabilitiesThe 9018 can reach a CFM of 1710 and RPMs at 1545. You can use the 9018 in a variety of places such as classrooms, offices, workstations, and so forth. Its 18� blades make it large enough to even use in living rooms.MobilityMany appliances require floor space, such as vacuums, air filters, grills, and so forth. The 9018 is the largest wall mounted fan Air King has to offer, and can give your home or living space the refreshment it needs because it can be mounted to any wall! |
|
|
VWM510 Vacmaster 5 Gallon Wet/Dry Utility Vacuum With 2 Stage Industrial Motor $127.99 It is 5 peak horsepower motor and its 2 stage industrial build, the Vacmaster VWM510 5 gallon wet/dry utility vacuum cleaner cleans out the toughest dirty with easy. The VWM510 offers great features, including:MountableUnlike other units that require dragging it on the floor, the VWM510 can be mounted on the wall with its easy-to-install wall mount frame that requires one stud. Use it for your garage and keep your work area clean.Easy ControlsThe large carry handle makes it comfortable to carry and it also has a large on/off switch that is dust sealed to prevent any blockages. It also can be switched on and off by a remote.AccessoriesThe VWM510 comes with a multitude of accessories that can be neatly stored away onboard. Its accessories include two extension wands, a cartridge filter, a reusable foam sleeve, a round dust brush, a floor/utility nozzle, a crevice tool, a car nozzle and an air/noise diffuser.Two HosesThe VWM510 includes two hoses instead of one, both with a diameter of 1 7/8�. One hose, a flex hose, runs 10’ long, as the other runs 7’ long. Having two hoses makes it easier to choose the right tool for the right task. |
|
|
SF12ST Seabreeze 1500 Watt Off the Wall Electric Heater With Auxiliary Power Outlet $69.95 Hate feeling that winter chill while jumping out of the shower? You don’t have to get any chicken bumps with the ultra-safe Seabreeze 1500 watt SF12ST Off the Wall electric heater! This convenient, portable and mountable heater can be yours with these great features:Thermaflo AdvantageSeabreeze’s patented Thermaflo technology ensures that the unit will provide consistent heat at 1000 and 1500 watts, allowing you to enjoy this electric heater without sacrificing comfort and energy.Auxilary OutletThe SF12ST portable heater has an auxiliary outlet to prevent electrical overload. It also allows you to use an outlet without sacrificing it for the SF12ST. Plug in your electric toothbrush, shaver, or even an air freshener for more convenience.�No Glow� Heating ElementThe SF12ST electric heater’s “No Glow� heating element helps the unit deliver up to 5120 BTUs of heat, a feat that no other portable 120 volt heater can achieve!Mountable, PortableThe Off the Wall space heater can be easily mounted and does not require tools. This saves you space on surfaces like bathroom counters or bedroom drawers. The SF12ST is also portable and compact so that it is convenient to use in many situations. |
|
|
SF12TA Seabreeze 1500 Watt Off the Wall Electric Space Heater With Whisper Quiet Operation $94.95 Small but mighty, the Seabreeze SF12TA 1500 watt Off the Wall electric space heater makes an excellent solution for room heating. It features many great aspects that puts it above and beyond other conventional space heaters, including:Smart Thermaflo TechnologyThermaflo is Seabreeze’s version of an energy-efficient thermostat. Unlike other heaters it relies on air velocity to efficiently heat the air. It saves up to 33% more energy than other electric heaters and also keeps a consistent temperature.Whisper QuietThe SF12TA portable heater operates at whisper quiet sound levels, allowing you to thoroughly enjoy heat without the hassle of a murmuring unit. Even while the heater is at top heat, the SF12TA Off the Wall remains quiet.Outlet MountableYou don’t have to worry about tripping over any wires or cords when the SF12TA mounts right on top of your power outlet! This makes it ultra-convenient in rooms and it also saves space. Bathroom ApplicationsBecause it is mounted on an outlet, the SF12TA electric heater is a great way to warm up your bathroom without cranking up the heat for your whole house. You don’t have to suffer running out of the shower shivering when the SF12TA mounts right on your power outlet, away from water and risks of electric shocks. |
|
|
LFK204 Q-Mark 2,000 Watt Electric Wall Heater With Double Pole Thermostat $209.95 The Qmark LFK204 high capacity, heavy-duty fan-forced wall heater can be used almost anywhere in residential, commercial or industrial areas and covers areas up to 200 square feet. This heater offers up to 2,000 watts of heat and can be recessed or surface mounted for true versatility. Three Piece DesignQMark LFK204 electric wall heaters have a three piece design for easy installation and a Northern white louvered cover. The rugged stamped steel front cover provides a down-flow air pattern and is finished in Navajo white. Effective and DurableUniform heat and long service life is provided by the steel finned metal sheath electric heating elements with low sheath temperature. Thermostat ControlA two pole thermostat is included with the Qmark LFK204 electric wall heater so that you are able to turn the heater all the way off. Safety FeaturesThe built-in thermal cut out disconnects the power in event of overheating due to accidental blockage and a fan delay switch that energizes the fan only after the elements are heated to prevent unheated air from being discharged. The fan motor is also only de-energized after the residual heat has dissipated when the heat is shut off. Permanently Lubricated Fan MotorThe Qmark LF204’s fan motor is permanently lubricated and totally enclosed to ensure long life, low maintenance and gently distribute warmth throughout room area. |
|
|
Stiebel Eltron CK 20E 208/240V Electric Wall Mounted Heater With Built-in Thermostat $149.99 Why settle for a bulky space heater when you can get style and function in one convenient unit? The Stiebel Eltron CK 20E electric wall mounted heater is a sleek alternative to conventional electric space or recessed heaters and provides quick heat in just about any location. The Stiebel Eltron CK 20E is capable of running at either 208 volts or 240 volts. At 208 volts, it produces 1500 watts of heat, and at 240 volts it produces 2000 watts. The curved body style is appealing and efficient – the vent for the CK 20E actually blows toward the ground to warm floors and for optimum heat distribution. Additional great features include a built-in thermostat for maximum room comfort; easy, pre-wired installation; and 3-year limited parts warranty. |
|
|
S1120 Hoover Handheld Wet/Dry Vacuum Cleaner With Wall Mounted Recharging Rack $22.99 The Hoover S1120 Handheld Wet/Dry Vacuum Cleaner is different from most handheld vacuum cleaners because it picks up liquid spills and dry debris. Not only does it clean wet and dry messes, it also is so versatile that it lifts liquid spills out of carpet and bare floors. The Hoover S1120 Handheld Wet/Dry Vacuum Cleaner has a 7.2 volt rechargeable battery that can last a long time on a single charge. It is bagless and uses an easy to empty dirt cup so there is no need to purchase bags. It also includes a washable and reusable filter. The S1120 handheld wet/dry vacuum cleaner has a wall mounted recharging rack for convenient storage. You’ll clean wet and dry messes quickly because the vacuum is always at hand for inconvenient messes. Complete with full one year warranty. |
|
|
CL Indus Tool Electric Heater Mounts to your Desk or Wall! $59.95 Feeling a chill while on the job? Let the Cozy Legs heating panel help. This compact unit mounts easily under your desk and radiates warmth to keep your feet and legs comfortable during chilly winter months. Perfect for use at home or in the workplace, this energy-efficient unit helps you stay warm and productive when there’s a draft, a faulty heater, or an overzealous air conditioner. Choose the Indus Tool CL heating panel and discover how Cozy Legs got its name. |
|
|
HHP1500 DeLonghi Micathermic Panel Radiator Heater With Wall Mount Bracket $94.95 The DeLonghi HHP1500 uses micathermic technology to warm up nearby objects as well as the surrounding air to keep you nice and warm. This radiator heater also features a stylish flat panel design and lightweight construction to take up as little space as possible!Adjustable ThermostatThe HHP1500 features an adjustable thermostat that allows you to customize how warm you want the heater to be.Anti-Freeze SettingThe DeLonghi HHP1500 radiator heater offers an anti-freeze setting that prevents bitterly cold temperatures.Multiple Heat TechnologiesThis space heater from DeLonghi uses micathermic technology, which is a combination of reflective and convection technologies. This not only heats up nearby objects, but also the air surrounding the heater.Internal Tip-OverThe HHP1500 comes with an internal tip-over switch that turns the unit off once it is tipped over. |
|
|
2011400 Shop-Vac Shop Vac Hang Up Mini Petite With Wall Bracket for Easy Storage $40.99 The Shop Vac Hang Up Mini 2011400 offers all the power equated with the Shop Vac brand in a petite easy to store size. The super quiet motor sacrifices no power while eliminating noise pollution. The 2011400 is all about creating a pleasurable cleaning experience with its light weight design and easy to grab handle. Plus the one gallon canister is perfect to store large amounts of dirt without having to worry about its maneuverability.The 2011400 ’s small size lends itself perfectly for storage with its hang able wall bracket. No need to worry about where to store its many included accessories as the vacuum comes equipped with a tool holder. The Hang Up Mini 2011400’s gulper nozzle is perfect for cleaning large amounts of debris. The crevice tool lets you get those hard to reach areas like between car seats and furniture. Pick up your Shop Vac Hang Up Mini 2011400, to have the Shop Vac power in a unique design today. |
|
|
AMS12 Alen Corporation 12,000 BTU Split Air Conditioner With 13.5 SEER $899 Alen Corporation AMS12 a 12,000 BTU cooling split air conditioner with a highly efficient 13.5 SEER energy rating. Not only is this unit extremely efficient but whisper quiet. Don’t have central AC? or adding a room and can’t attach it to your current central system? This lower cost alternative might just be what your looking for. Split air conditioners are much quieter than a window AC and not only that the indoor air handler is wall mounted.Only using 1,060 watts of power the AMS12 also works as a dehumidifier removing 70 pints of water a day out of the air it’s cooling.The air handler of the AMS12 which is the indoor unit, is mounted on the inside of a the house on the wall near an exterior wall which is connected to the compressor (external unit) by a small hole the wall large enough for 2 small pipes. Since the compressor is outside of the house like an central AC the operation of the AMS12 is rather quiet. |
|
|
1F78-144 White Rogers Thermostat Is Battery Powered For Easy Use $33.95 1F78-144 single-stage White Rodgers thermostat is a battery-powered non-programmable model that combines a large display with electronic temperature accuracy for results that you will love! This is the best thermostat if you are looking to replace an old thermostat for a digital. The design is specifically altered for this purpose, as it is wide to cover marks left behind by your previous make and model thermostat. No-repainting or wall covering is necessary—Simply add your new thermostat to the wall and the sleek, low-profile will automatically look great! |
|
|
CDF542 Qmark Electric Ceiling Heater – 283 CFM $469.95 Qmark CDF ceiling-mounted fan-forced heaters are designed for commercial and industrial areas requiring electric fan-forced heat. This product does not include the mounting enclosure. The CDFSE surface enclosures are designed to mount flat on the ceiling and extend only six inches into the room. Type CDFRE enclosures have no protrusions outside the recess box, allowing the heater to recess only seven inches into ceiling space. Mounts into permanent ceiling with trim ring. A thermal cutout shuts off the heater in the event of overheating and reactivates the heater when the temperature returns to normal. Optional thermostat mounts inside unit to control room temperature. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life. Comes in a navajo white finish. Mounting sleeve required for installation.Please Note: The mounting sleeve is required for installation and must be purchased separately. |
|
|
2515W Q-Mark 120V Electric Baseboard Heater With 1250 Watts $59.95 Convenience is the word that springs to mind when the Q-Mark 2515W Electric Baseboard Heater is mentioned. The easy out knockouts at each end make the wiring convenient. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. When you purchase a Q-Mark 2515W electric baseboard heater you receive easy installation and quiet operation. There is no popping and pinging normally associated with baseboard heaters. The 2515W has built-in safety thermal cut-off protection. During installation, the 2515W electric baseboard heater stands unsupported. The Navajo white enamel finish retains an attractive appearance and is compatible with all interior decors. The pre-notched mounting guide marks make for fast and easy installation without disassembling the unit. |
|
|
25426W Q-Mark 240/208V Electric Baseboard Heater With 500 Watts $33.95 The Q-Mark 25426W Electric Baseboard Heater is easily installed and designed for quiet operation. There is no popping and pinging normally associated with baseboard heaters. The 25426W has built-in safety thermal cut-off protection. The Q-Mark 25426W electric baseboard heater has convenient wiring with the help of easy out knockouts at each end. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. During installation, the 25426W electric baseboard heater stands unsupported. The Navajo white enamel finish retains an attractive appearance and is compatible with all interior decors. The pre-notched mounting guide marks make for fast and easy installation without disassembling the unit. |
|
|
2542W Q-Mark 240/208V Electric Baseboard Heater With 400 Watts $29.95 For your convenience, the Q-Mark 2542W Electric Baseboard Heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Fast and easy installation without disassembly is possible because of the pre-notched mounting guide marks. The Q-Mark 2542W electric baseboard heater provides you with the simplicity of easy out knockouts and convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. If you’re looking for a heater that operates quietly, look no further than the 2542W electric baseboard heater. There is no popping and pinging normally associated with baseboard heaters. For your safety, built-in safety thermal cut-off protection is also included. |
|
|
2543W Q-Mark 240/208V Electric Baseboard Heater With 750 Watts $39.95 Enjoy the simplicity of easy out knockouts and convenient wiring with the Q-Mark 2543W Electric Baseboard Heater. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. The Q-Mark 2543W baseboard heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Fast and easy installation without disassembly is possible because of the pre-notched mounting guide marks. If you’re looking for a heater that operates quietly, look no further than the 2543W electric baseboard heater. There is no popping and pinging normally associated with baseboard heaters. This baseboard heater has built-in safety thermal cut-off protection. |
|
|
2545W Q-Mark 240/208V Electric Baseboard Heater With 1250 Watts $59.95 The easily installed Q-Mark 2545W Electric Baseboard Heater is designed for quiet operation. There is no popping and pinging normally associated with baseboard heaters. This baseboard heater has built-in safety thermal cut-off protection. With the easy out knockouts at each end of the Q-Mark 2545W baseboard heater you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. The 2545W baseboard heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit. |
|
|
2548W Qmark Electric Baseboard Heater – Over 6,000 BTU $89.95 This easily installed QMark baseboard heater is designed for quiet operation…no popping and pinging normally associated with baseboard heaters. The 2548W has built-in safety thermal cut-off protection. And with the easy out knockouts at each end you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit. |
|
|
2516W Q-Mark 120V Electric Baseboard Heater 1500 Watts $69.95 This easily installed QMark baseboard heater is designed for quiet operation…no popping and pinging normally associated with baseboard heaters. The 2516W has built-in safety thermal cut-off protection. And with the easy out knockouts at each end you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit. |
|
|
FF12HH Intermatic Spring Timer With 12-Hour Capacity $37.95 The time is right for the Intermatic FH12HH spring-wound timer! This mechanical timer provides SPST capability for up to 12 hours. Its simple, contemporary design is a stylishly understated addition to your wall. Choose the FH12HH for precise timing in an attractive package. |
|
|
1A66-641 White Rodgers Line Voltage Thermostat 240V 4-wire $44.95 The 1A66/1A66W by White Rodgers is designedfor use on all types of electrical heating installationssuch as cable heat, baseboards, wall insert heaters,etc. Its narrow operating differential and the ability of itsfully exposed knob to sense both radiant heat and roomair temperature make this control ideal for use on suchinstallations. |
|
|
T7770A1006 Honeywell Thermostat Accessory White, 20k ohm $24.95 Honeywell T7770A-1006 Remote Temperature Sensor is a 20 K ohm non-linear temperature wall module applicable to a networked sensor. Listed with the Underwriters Laboratory, the Canadian Standards Association, and the N.E.C., you are ensured a well-working unit with the T7770A1006. THE LOCKING COVER IS FEATURED ON ALL OF THESE HONEYWELL MODELS! Order today! |
|
|
T822K1018 Honeywell Thermostat With Thermometer Scale on Face $39.95 Honeywell T822K-1018 Thermostat comes with a vented cover to assist in improving your thermostats’ temperature settings! THE T822K1018 MOUNTS DIRECTLY ON THE WALL OR ON VERTICAL OUTLET BOX!In Honeywell’s own shade of white, this thermostat will also look great while it manages your single-stage heating system. |
|
|
Q539A1469 Honeywell Thermostat Subbase Cooling Anticipators $34.95 The Q539A-1469 Honeywell Thermostat subbase is a switching subbase for conventional systems. With round mounting, this thermostat will cover the marks of your previous thermostat for better installation. THIS SUBBASE SUPPORTS ONE HEATING AND ONE COOLING STAGE AND CAN BE MOUNTED DIRECTLY ON A WALL OR OUTLET BOX. Order the Q539A1469 for your Honeywell thermostat. |
|
|
293HD Vornado Heavy Duty Air Circulator Fan With Comfort Grip Handle $129.99 The Vornado 293HD heavy duty air circulator fan is especially designed for use in the garage, workshop or job site. It moves air up to 100 feet. Strong ConstructionThe Vornado 293HD electric fan is nearly indestructible. It is made of strong glass filled blade and includes a heavy duty powder-coated base. Permanently Lubricated MotorA ball-bearing motor is included on the 293HD heavy duty fan that never needs oiling and is dust resistant. Includes 2 Wall BracketsThe 2 included wall brackets provide 2 off-the-floor placement options. Made in the U.S.A. This shop fan was designed, engineered and assembled in the United States of America. |
|
|
L2310 Hoover GUV ProGrade Garage Utility Vacuum Cleaner With 30-Foot Crush-Proof Hose $189.99 The Hoover L2310 garage utility vacuum cleaner is great for cleaning garages, cars or workshops. It features a 5 gallon tank capacity and a 30 foot crush-proof hose. Heavy Duty Steel ConstructionFor lasting durability, the Hoover L2310 garage utility vacuum features heavy duty steel construction. 10 Amp MotorThe L2310 Hoover utility vacuum features a 10 amp motor that provides powerful suction and quiet operation. Easy Wall Mount AssemblyThere is no need to take up valuable floor space with the easy wall mount assembly. Lifetime FilterThe filter lasts for the entire life of the products, ensuring effective operation for an extended period of time. |
|
|
Friedrich PDXWS Wall Sleeve for PTACs $123.92 Friedrich Wall Sleeve PDXWS Wall Sleeve Pkg Terminal AC & Heat Pump Accessories Wall Sleeve Height 16 In Width 42 In Depth 13 3/4 In Powder Coate… |
|
|
Friedrich WALL SLEEVE F/UNIFIT SERIES FR $115.02 Thru the Wall Sleeve for Friedrich Uni Fit Air Conditioners… |
|
|
Friedrich WSC Wall Sleeve $94.90 Friedrich WallMaster Wall Sleeve – WSD. Wall Sleeve for the Wallmasters… |
|
|
Friedrich WSD Wall Sleeve $96.99 Friedrich WSD Wall Sleeve… |
Panther tank – Slurry Pump EGM – slurry pump impeller
Development and production Design This section needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (September 2009) The Panther was a direct response to the Soviet T-34 and KV-1 tanks.
First encountered on 23 June, 1941, the T-34 outclassed the existing Panzer III and IV. At the insistence of General Heinz Guderian, a special Panzerkommision was dispatched to the Eastern Front to assess the Soviet tanks. Among the features of the Soviet tank considered most significant were the sloping armor, which gave much improved shot deflection and also increased the effective armor thickness against penetration, the wide track, which improved mobility over soft ground, and the 76.2 mm gun, which had good armor penetration and fired an effective high-explosive round.
Daimler-Benz (DB) and Maschinenfabrik Augsburg-Nrnberg AG (MAN) were given the task of designing a new thirty to thirty-five-ton tank, designated VK30.02, by April 1942 (apparently in time to be shown to Hitler for his birthday). Panther on the Eastern Front, 1944. Panther Ausf. G in Houffalize, Belgium. The DB design was a direct homage to the T-34. It resembled the T-34 hull and turret form. DB’s design used a leaf spring suspension whereas the T-34 used coil springs. The DB turret was smaller than that of the MAN design and had a smaller turret ring which was the result of the narrower hull required by the leaf spring suspension which lay outside of hull. The main advantages of the leaf springs over a torsion bar suspension were a lower hull silhouette and a simpler shock damping design. Like the T34, the DB design had a rear drive sprocket. Unlike the T-34, the DB design had a three-man turret crew: commander, gunner, and loader. But as the planned L/70 75 mm gun was much longer and heavier than the T-34’s, mounting it in the Daimler-Benz turret was difficult. Plans to reduce the turret crew to two men to stem this problem were eventually dropped. The MAN design embodied more conventional German thinking with the transmission and drive sprocket in the front and a turret placed centrally on the hull. It had a gasoline engine and eight torsion-bar suspension axles per side. Because of the torsion bar suspension and the drive shaft running under the turret basket, the MAN Panther was higher and had a wider hull than the DB design. The slightly earlier, Henschel designed Tiger I heavy tank’s use of a “slack-track” Christie-style pattern of large road wheels with no return rollers for the upper run of track, and with the main road wheels being overlapping and interleaved in layout, were design concepts broadly repeated with the MAN design for the Panther. The two designs were reviewed over a period from January 1942 through March 1942. Reichminister Todt, and later, his replacement Albert Speer, both recommended the DB design to Hitler because of its several advantages over the initial MAN design. However, at the final submission, MAN improved their design, having learned from the DB proposal, and a review by a special commission appointed by Hitler in May 1942 ended up selecting the MAN design. Hitler approved this decision after reviewing it overnight. One of the principal reasons given for this decision was that the MAN design used an existing turret designed by Rheinmetall-Borsig while the DB design would have required a brand new turret to be designed and produced, substantially delaying the commencement of production. Production The MAN design also had better fording ability, easier gun servicing and higher mobility due to better suspension, wider tracks, and a bigger fuel tank. A mild steel prototype was produced by September 1942 and, after testing at Kummersdorf, was officially accepted.
It was put into immediate production. The start of production was delayed, however, mainly because there were too few specialized machine tools needed for the machining of the hull. Finished tanks were produced in December and suffered from reliability problems as a result of this haste. The demand for this tank was so high that the manufacturing was soon expanded beyond MAN to include Daimler-Benz, Maschinenfabrik Niedersachsen-Hannover (MNH) and Henschel & Sohn in Kassel. The initial production target was 250 tanks per month at MAN. This was increased to 600 per month in January 1943. Despite determined efforts, this figure was never reached due to disruption by Allied bombing, manufacturing bottlenecks, and other difficulties. Production in 1943 averaged 148 per month. In 1944, it averaged 315 a month (3,777 having been built that year), peaking with 380 in July and ending around the end of March 1945, with at least 6,000 built in total. Strength peaked on 1 September, 1944 at 2,304 tanks, but that same month a record number of 692 tanks were reported lost. Allied bombing was first directed at the common chokepoint for both Panther and Tiger production – the Maybach engine plant, which was bombed the night of April 2728, 1944. Production was shut down for five months, but a second plant had already been planned, the Auto-Union plant at Siegmar, and this came online in May 1944. Targeting of Panther factories began with a bombing raid on the DB plant on August 6, 1944, and again on the night of August 23-24, 1944. MAN was struck on September 10, October 3, and October 19, 1944, and then again on January 3 and February 2021, 1945. MNH was not attacked until March 14 and March 28, 1945. In addition to interfering with tank production goals, the bombing forced a steep drop in the production of spare parts. Spare parts as a percentage of tank production dropped from 2530 percent in 1943, to 8 percent in the fall of 1944. This only compounded the problems with reliability and numbers of operational Panthers as tanks in the field had to be cannibalized for parts. Production figures Panther tank production line The Panther was the third most produced German armored fighting vehicle. Production by type[citation needed] Model Number Date Notes Prototype 2 11/42 Designated V1 and V2 Ausf. D 842 1/43 to 9/43 Ausf. A 2,192 8/43 to 6/44 Sometimes called Ausf. A2 Ausf. G 2,953 3/44 to 4/45 Befehlspanzer Panther 329 5/43 to 2/45 Converted Beobachtungspanzer Panther 41 44 to 45 Converted Bergepanther 347 43 to 45 Panther production in 1944 by manufacturer Manufacturer % of total Maschinenfabrik Augsburg-Nrnberg (M.A.N.) 35% Daimler-Benz 31% Maschinenfabrik Niedersachsen-Hannover 31% Other 3% Cost One source has cited the cost of a Panther tank as 117,100 Reichmarks (RM). This compared with 82,500 RM for the StuG III, 96,163 RM for the Panzer III, 103,462 RM for the Panzer IV, and 250,800 RM for the Tiger I. These cost figures did not include the cost of the armament and radio. In terms of Reichmarks per ton, therefore, the Panther tank was one of the most cost-effective of the German AFV’s of World War II. However, these cost figures should be understood in the context of the time period in which the various AFVs were first designed, as the Germans increasingly strove for designs and production methods that would allow for higher production rates, and thus steadily reduced the cost of their AFVs. For example, another source has cited the total cost of the early production Tiger I in 19421943 to be as high as 800,000 RM. The process of streamlining the production of German AFVs first began after Albert Speer became Reichminister in early 1942 and steadily accelerated through 1944; production of the Panther tank thus coincided with this period of increased manufacturing efficiency. German AFV manufacturers at the start of World War II utilized only heavily labor-intensive and costly manufacturing methods unsuitable for the needs of mass production; even with streamlined production methods, Germany never approached the efficiency of Allied manufacturing during World War II. Design characteristics The Panther had a five man crew The weight of the production model was increased to 45 metric tons from the original plans for a 35 ton tank. Hitler had personally reviewed the final designs and insisted on an increase in the thickness of the frontal armor – the front glacis plate was increased from 60 mm (2.4 in) to 80 mm (3.1 in) and the turret front plate was increased from 80mm to 100 mm (3.9 in). The Panther was rushed into combat before all of its teething problems were corrected. Reliability was considerably improved over time, and the Panther did prove to be a very effective fighting vehicle; however, some design flaws, such as its weak final drive units, were never corrected due to various shortages in German war production. The crew was made up of five members: driver, radio operator (who also fired the bow machine gun), gunner, loader, and commander. Engine The first 250 Panthers were powered by a Maybach HL 210 P30 engine, V-12 gasoline engine which delivered 650 metric hp at 3000 rpm and had three simple Air Filters. Starting in May 1943, the Panthers were built using the 700 PS (690 hp, 515 kW)/3000 rpm, 23.1 litre Maybach HL 230 P30 V-12 gasoline engine. The light alloy block used in the HL 210 was replaced by a cast iron block to save aluminum. Two multistage “cyclone” air filters were used to automate some of the dust removal process. The HL 230 P30 engine was a very compact design which kept the space between the cylinder walls to a minimum. The crankshaft was composed of seven discs, each with an outer race of roller bearings, and a crankshaft pin between each disc. To reduce the length of the engine further, by one half a cylinder diameter, the two banks of 6 cylinders of the V-12 were not offset – the center points of the connecting rods of each cylinder pair in the “V” where they joined the crankshaft pin were thus at the same spot rather than offset; to accommodate this arrangement, one connecting rod in the pair of cylinders was forked and fit around the other “solid” connecting rod at the crankshaft pin. (A more typical “V” engine would have had offset cylinder banks and each pair of connecting rods would have fit simply side by side on the crankshaft pin). This compact arrangement with the connecting rods was the source of considerable teething problems early on. Blown head gaskets were another problem which was corrected with improved seals in September 1943. Improved bearings were introduced in November 1943 to replace the faulty ones that had failed frequently. An engine governor was also added in November 1943 that reduced the maximum engine speed to 2500 rpm. An eighth crankshaft bearing was added beginning in January 1944 to help reduce motor failures. The engine compartment space was designed to be watertight so that the Panther could be submersed and cross waterways. The result was that the engine compartment was poorly ventilated and prone to overheating. The fuel connectors in the early models were non-insulated, leading to leakage of fuel fumes into the engine compartment. This led to many engine fires in the early Panthers. Additional ventilation was added to draw off these gasses, which improved but did not completely solve the problem of engine fires. Other measures taken to reduce this problem included improving the coolant circulation inside the motor and adding a reinforced membrane spring to the fuel pump. The Panther had a solid firewall separating the engine compartment and the fighting compartment to keep engine fires from spreading to the crew. The engine became more reliable over time. A French assessment of their stock of captured Panthers in 1947 concluded that the engine had an average life of 1,000 km (620 mi) and maximum life of 1,500 km (930 mi). Suspension Interleaved wheels on a Panther The suspension consisted of front drive sprockets, rear idlers and eight double-interleaved rubber-rimmed steel road wheels on each side, suspended on a dual torsion bar suspension. The dual torsion bar system, designed by Professor Ernst Lehr, allowed for a wide travel stroke and rapid oscillations and high reliability, thus allowing for relatively high speed travel by this heavy tank over undulating terrain. However, the extra space required for the bars running across the length of the bottom of the hull, below the turret basket, increased the overall height of the tank and also prevented an escape hatch in the hull bottom. When damaged by mines, the torsion bars often required a welding torch for removal. The Panther’s suspension was complicated to manufacture and the interleaved system made replacing inner road wheels time consuming. The interleaved wheels also had a tendency to become clogged with mud and rocks and ice and could freeze solid overnight in the harsh winter weather of the Eastern Front. Shell damage could cause the road wheels to jam together and become extremely difficult to separate. Interleaved wheels had long been standard on all German half-tracks. The extra wheels did provide better flotation and stability and also provided more armor protection for the thin hull sides than smaller wheels or non-interleaved wheel systems, but the complexity meant that no other country ever adopted this design for their tanks. In September 1944, and again in March/April 1945, M.A.N. built a limited number of Panther tanks with steel roadwheels originally designed for the Tiger II and late series Tiger I tanks. Steel roadwheels were introduced from chassis number 121052 due to raw material constraints. From November 1944 through February 1945, a conversion process began to use sleeve bearings in the Panther tank, as there was a shortage of ball bearings. The sleeve bearings were primarily used in the running gear; plans were made also to convert the transmission to sleeve bearings but were not carried out as production of Panther tanks came to an end. Steering and Transmission Repair of the transmission of a Panther Steering was accomplished through a seven-speed AK 7-200 synchromesh gearbox, designed by Zahnradfabrik Friedrichshafen, and a MAN single radius steering system, operated by steering levers. Each gear had a fixed radius of turning, ranging from five meters for 1st gear up to 80 meters for 7th gear. The driver was expected to judge the sharpness of a turn ahead of time and shift into the appropriate gear to turn the tank. The driver could also engage the brakes on one side to force a sharper turn. This manual steering was a much simplified design compared to the more sophisticated dual radius hydraulically controlled steering system of the Tiger tanks. The AK 7-200 transmission was also capable of pivot turns, but this method of turning could accelerate failures of the final drive. Throughout its career, the weakest parts in the Panther were its final drive units. The problems of the Panther’s final drives were from a combination of factors. The original MAN proposal had called for the Panther to have an epicyclic/planetary (hollow spur) gear system in the final drive, similar to that used in the Tiger I. However, Germany at the time suffered from a shortage of gear-cutting machine tools and, unlike the Tiger tanks, the Panther was intended to be produced in large numbers. To achieve the goal of higher production rates, numerous simplifications were made to the Panther’s design and manufacturing. This process was aggressively pushed forward, sometimes against the wishes of designers and army officers, by the Chief Director of Armament and War Production, Karl-Otto Saur, who worked under (and later succeeded, in April 1945) Reichminister Albert Speer. And so the Panther’s final drive was changed to a double spur system. Although much simpler to produce, the double spur gears had inherently higher internal impact and stress loads, making them prone to failure under the high torque requirements of the heavy Panther tank. In contrast, both the Tiger II and the US M4 Sherman tank had double helical (herringbone) gears in their final drives, a system that reduced internal stress loads and was less complex than epicyclic/planetary gears. Germany’s wartime shortage of key alloying agents for making high strength steels also meant that to reach the desired high production rates a more readily available lower quality steel had to be substituted in the production of the double spur gears. Compounding these problems was the fact that the final drive’s housing and gear mountings were too weak, because of the type of steel used and/or because of the tight space allotted for the final drive; the gear mountings thus deformed easily under the high torque and stress loads, pushing the gears out of alignment and resulting in failure. The final drives of the Panther tank were so weak that their average fatigue life was only 150 km. In Normandy, about half of the abandoned Panther tanks were found by the French to have broken final drives. Plans were made to replace the final drive, either with a version of the original epicyclic/planetary gears planned by MAN, or with the final drive of the Tiger II. These plans were intertwined with the planning for the Panther II, and like the Panther II, never came to fruition. It was estimated that building the epicyclic/planetary gear final drive would have required 2.2 times more machining work, and this would have affected the manufacturing output. The mechanical unreliability of the Panther, a characteristic shared with the Tiger tanks, meant that long road marches would result in a significant number of losses due to breakdowns, and so the German Army had to ship the tanks by rail as close to the battlefield as possible. Armor Armor layout Initial production Panthers had a face-hardened glacis plate (the main front hull armor piece), but as armor-piercing capped rounds became the standard in all armies (thus defeating the benefits of face-hardening, which caused uncapped rounds to shatter), this requirement was deleted on March 30, 1943. By August 1943, Panthers were being built only with a homogeneous steel glacis plate. The Panther front hull had 80 mm of armor sloped back at 55 degrees from the vertical, welded but also interlocked for strength. The combination of a steep slope and thick armor meant that few Allied or Soviet weapons could penetrate this part of the tank. The armor for the side hull and superstructure (the side sponsons) was much thinner (4050 mm thick). The thinner side armor was necessary to keep the tank’s overall weight within reasonable bounds, but it made the Panther vulnerable to attacks from the side by most Allied and Soviet tank and anti-tank guns. German tactical doctrine for the use of the Panther thus emphasized the importance of flank protection. Five millimeter thick skirt armor, Schrzen, intended to provide protection for the lower side hull from Soviet anti-tank rifle fire was fitted on the hull side. Zimmerit coating against magnetic mines started to be applied at the factory on late Ausf D models beginning in September 1943 ; an order for field units to apply Zimmerit to older versions of the Panther was issued in November 1943. In September 1944, orders to stop all application of Zimmerit were issued, based on rumors that hits on the Zimmerit had caused vehicle fires. The rear hull top armor was only 16 mm thick, and had two radiator fans and four air intake louvres over the engine compartment that were vulnerable to strafing by aircraft. Panther crews were aware of the weak side armor and made unauthorized augmentations by hanging track links or spare roadwheels onto the turret and/or the hull sides. As the war progressed, Germany was forced to reduce or no longer use certain critical alloy materials in the production of armor plate, such as nickel, tungsten, molybdenum, and manganese; this did result in lower impact resistance levels compared to earlier armor. Manganese from mines in the Ukraine ceased when the German Army lost control of this territory in February 1944. Allied bombers struck the Knabe mine in Norway and stopped a key source of molybdenum; other supplies from Finland and Japan were also cut off. The loss of molybdenum, and its replacement with other substitutes to maintain hardness, as well as a general loss of quality control resulted in an increased brittleness in German armor plate, which developed a tendency to fracture when struck with a shell. Testing by U.S. Army officers in August 1944 in Isigny, France on three Panther tanks showed catastrophic cracking of the armor plate on two of the Panthers Armament The main gun was a 7.5 cm Rheinmetall-Borsig KwK 42 (L/70) with 79 rounds (82 on Ausf. G) with semi-automatic shell ejection. The main gun used three different types of ammunition, APCBC-HE (Pzgr. 39/42), HE (Sprgr. 42) and APCR (Pzgr. 40/42), the last of which was usually in short supply. While it was of only average caliber for its time, the Panther’s gun was one of the most powerful tank guns of WWII, due to the large propellant charge and the long barrel, which gave it a very high muzzle velocity and excellent armor-piercing qualities. The flat trajectory also made hitting targets much easier, since accuracy was less sensitive to range. The Panther’s 75 mm gun had more penetrating power than the main gun of the Tiger I heavy tank, the 8.8 cm KwK 36 L/56, although the larger 88 mm projectile might inflict more damage if it did penetrate. The tank typically had two MG 34 machine guns of a specific version designed for use in armored combat vehicles featuring an armored barrel sleeve. An MG 34 machine gun was located co-axially with the main gun on the gun mantlet; an identical MG 34 was located on the glacis plate and fired by the radio operator. Initial Ausf. D and early Ausf. A models used a “letterbox” flap opening, through which the machine gun was fired. In later Ausf A and all Ausf G models (starting in late November-early December 1943), a ball mount in the glacis plate with a K.Z.F.2 machine gun sight was installed for the hull machine gun. Turret Panther with regular mantlet. Panther with flattened lower (‘chin’) mantlet The front of the turret was a curved 100 mm thick cast armor mantlet. Its transverse-cylindrical shape meant that it was more likely to deflect shells, but the lower section created a shot trap. If a non-penetrating hit bounced downwards off its lower section, it could penetrate the thin forward hull roof armor, and plunge down into the front hull compartment. Penetrations of this nature could have catastrophic results since the compartment housed the driver and radio operator sitting along both sides of the massive gearbox and steering unit; more importantly four magazines containing main gun ammunition were located between the driver/radio operator seats and the turret, directly underneath the gun mantlet when the turret was facing forward. For the Ausf D and Ausf A models, a total of 27 rounds were stored in these magazines, which was reduced to 18 rounds for the Ausf G model. From September 1944, a slightly redesigned mantlet with a flattened and much thicker lower “chin” design started to be fitted to Panther Ausf G models, the chin being intended to prevent such deflections. Conversion to the “chin” design was gradual however, and Panthers continued to be produced to the end of the war with the rounded gun mantlet. In most cases the Panther’s gun mantlet could not be penetrated by either the M4’s 75 mm gun nor the T-34s 85 mm gun but could be penetrated by well-aimed shots at 100 m by the M4’s 76 mm gun, at 500 m by the Soviet A-19 122 mm gun on the IS-2 and at over 2500 yards (2286 m) by the British 17-pounder using APDS-ammunition. The side turret armor of 45 mm (1.8 in) was also vulnerable to penetration at long range by almost all Allied tank guns including the M4’s 75 mm gun which could punch through at 1500 m. These were the main reasons for continued work on a redesigned Panther turret, the Schmalturm, discussed later. The Ausf A model introduced a new cast armor commander’s cupola, replacing the more difficult to manufacture forged cupola. It featured a steel hoop to which a third MG 34 or either the coaxial or the bow machine gun could be mounted for use in the anti-aircraft role, though it was rare for this to be used in actual combat situations. The first Panthers, the Ausf D model, had a hydraulic motor that could traverse the turret at a maximum rate of 360 degrees in 60 seconds independent of engine speed. This slow traverse speed was improved in the Ausf A model with a hydraulic traverse that varied with engine speed, with a maximum rate of 360 degrees in 15 seconds if the engine was running at 3000 rpm. With the engine at 1000 rpm, the maximum traverse speed was 360 degrees in 46 seconds. A hand traverse wheel was like in any other tank, Axis or Allied, provided for the Panther gunner to fine tune the aim. This arrangement of the turret traverse mechanism was a slight weakness, as traversing the Panther’s turret rapidly onto a target required close coordination between the gunner and driver (to rev up the engine to maximum speed). By comparison, the M4 Sherman turret traversed at up to 360 degrees in 15 seconds and was independent of engine speed, which gave it an advantage over the Panther in close-quarters combat.. Ammunition Storage The locations for ammunition storage for the main 75 mm gun were a weak point of the Panther. No ammunition for the Panther was stored inside the turret, a positive given the weak side turret armor. However, a significant amount of ammunition was stored in the sponsons. In the Ausf D and A models, 18 rounds were stored next to the turret on each side, for a total of 36 rounds. In the Ausf G, which had deeper sponsons, 24 rounds were stored on each side of the turret, for a total of 48 rounds. In all models, 4 rounds were also stored in the left sponson between the driver and the turret. An additional 36 rounds were stored inside the hull of the Ausf D and A models – 27 in the forward hull compartment directly underneath the mantlet. In the Ausf G, the hull ammunition storage was reduced to 27 rounds total, with 18 rounds in the forward hull compartment. For all models, 3 rounds were kept under the turntable of the turret. The loader was stationed in the right side of the turret. With the turret facing forward, he had access only to the right sponson and hull ammunition, and so these served as the main ready-ammunition bins. The thin side armor could be penetrated at combat ranges by many Allied tank guns, and this meant that the Panther was vulnerable to catastrophic ammunition fires (“brewing up”) if hit from the sides. Combat use Panther tanks of the Grodeutschland Division advance in the area of Iai, Romania in 1944. Panther Ausf. Ds on rail cars in April/May 1943. Panthers were supplied to form Panzer Abteilung 51 (Tank Battalion 51) on 9 January, and then Pz.Abt. 52 on 6 February. The first production Panther tanks were plagued with mechanical problems. The engine was dangerously prone to overheating and suffered from connecting rod or bearing failures.
Gasoline leaks from the fuel pump or carburettor, as well as motor oil leaks from gaskets easily produced fires in the engine compartment; several Panthers were destroyed in such fires. Transmission and final drive breakdowns were the most common and difficult to repair. A large list of other problems were detected in these early Panthers and so from April through May 1943 all Panthers were shipped to Falkensee and Nuernburg for a major rebuilding program. This did not correct all of the problems, so a second program was started at Grafenwoehr and Erlangen in June 1943. Eastern Front The Panther tank was seen as a necessary component of the upcoming Operation Zitadelle, and the attack was delayed several times because of the mechanical problems of the Panthers, with the eventual start date of the battle only six days after the last of the Panthers had been delivered to the front. This resulted in major problems in the Panther units during the Battle of Kursk as tactical training on the unit level, coordination by radio, and driver training were all seriously deficient. It was not until the period of June 2329 that a total of 200 rebuilt Panthers were finally issued to Panther Regiment von Lauchert of the XLVIII Panzer Corps (4 Panzer Army). Two of the Panthers were immediately lost due to motor fires upon disembarking from the trains. By July 5, 1943, when the Battle of Kursk started, there were only 184 operational Panthers. Within two days, the number of operational Panthers had dropped to 40. On July 17, 1943 after Hitler had ordered a stop to the German offensive, Gen. Heinz Guderian sent in the following preliminary assessment of the Panthers: Due to enemy action and mechanical breakdowns, the combat strength sank rapidly during the first few days. By the evening of 10 July there were only 10 operational Panthers in the front line. 25 Panthers had been lost as total writeoffs (23 were hit and burnt and two had caught fire during the approach march). 100 Panthers were in need of repair (56 were damaged by hits and mines and 44 by mechanical breakdown). 60 percent of the mechanical breakdowns could be easily repaired. Approximately 40 Panthers had already been repaired and were on the way to the front. About 25 still had not been recovered by the repair service… On the evening of 11 July, 38 Panthers were operational, 31 were total writeoffs and 131 were in need of repair. A slow increase in the combat strength is observable. The large number of losses by hits (81 Panthers up to 10 July) attests to the heavy fighting. A later report (generated every ten days) of the inventory of Panthers on July 20, 1943 showed 41 Panthers as operational, 85 as repairable, 16 severely damaged and needing repair in Germany, 56 burnt out (due to enemy action), and 2 that had been destroyed by motor fires. However, before the Germans ended their offensive at Kursk, the Soviets began their counteroffensive, and succeeded in pushing the Germans back into a steady retreat. Thus, a report on August 11, 1943 showed that the numbers of total writeoffs in Panthers swelled to 156, with only 9 operational Panthers. The German Army was forced into a fighting retreat and increasingly lost Panthers in combat as well as from abandoning and destroying damaged vehicles. The Panther demonstrated its capacity to destroy any Soviet AFV from long distance during the Battle of Kursk, and had a very high overall kill ratio. However, it comprised less than seven percent of the estimated 2,4002,700 total AFVs deployed by the Germans in this battle, and its effectiveness was limited by its mechanical problems and the in-depth layered defense system of the Soviets at Kursk. Its greatest historical role in the battle may have been a highly negative one – its contribution to the decisions to delay the original start of Operation Zitadelle for a total of two months, time which the Soviets used to build up an enormous concentration of minefields, anti-tank guns, trenches, and artillery defenses. After the losses of the Battle of Kursk, the German Army went into a permanent state of retreat against the Red Army. The numbers of Panthers were slowly re-built on the Eastern Front, and the percentage of operational Panthers increased as its reliability was improved. In March 1944, Guderian reported of the Panther: “Almost all the bugs have been worked out”, although many Panther units continued to report significant mechanical problems, especially with the final drive. The greatly outnumbered Panthers came to be used as mobile reserves to fight off major attacks. The highest total number of Panthers listed as operational on the Eastern Front was achieved in September 1944, when some 522 Panthers were listed as operational out of a total of 728. Throughout the rest of the war, Germany continued to keep the great majority of Panther forces on the Eastern Front, where the situation progressively worsened for the Germans. The last recorded status of Panther forces, on March 15, 1945, listed 740 Panthers on the Eastern Front with 361 operational. By this time the Red Army had entered East Prussia and was advancing through Poland. Western Front – France At the time of the invasion of Normandy, there were initially only two Panther-equipped Panzer regiments in the Western Front, with a total of 156 Panthers between them. From June through August 1944, an additional seven Panther regiments were sent into France, reaching a maximum strength of 432 in a status report dated July 30, 1944. The majority of German panzer forces, six and a half divisions, were drawn into the British Second Army sector in the open country around Caen; the numerous battles became collectively known as the Battle of Caen. US forces in the meantime, facing one and a half German panzer divisions, mainly the Panzer Lehr Division, struggled in the heavy, low-lying bocage terrain west of Caen. Against the M4 Shermans of the Allied tank forces during this time, the Panther tank proved to be most effective when fighting in open country and shooting at long range – its combination of superior armor and firepower allowed it to engage at distances from which the Shermans could not respond.. However, the Panther struggled in the bocage country of Normandy and was vulnerable to side and close-in attacks in the built-up areas of cities and small towns. The commander of the PanzerLehr Division, Gen. Fritz Bayerlein made these comments about the weaknesses of the Panther tank in the fighting in Normandy: While the PzKpfw IV could still be used to advantage, the PzKpfw V [Panther] proved ill adapted to the terrain. The Sherman because of its maneuverability and height was good…[the Panther was] poorly suited for hedgerow terrain because of its width. Long gun barrel and width of tank reduce maneuverability in village and forest fighting. It is very front-heavy and therefore quickly wears out the front final drives, made of low-grade steel. High silhouette. Very sensitive power-train requiring well-trained drivers. Weak side armor; tank top vulnerable to fighter-bombers. Fuel lines of porous material that allow gasoline fumes to escape into the tank interior causing a grave fire hazard. Absence of vision slits makes defense against close attack impossible. Through September and October, a series of new Panzer-Brigades equipped with Panther tanks were sent into France to try to stop the Allied advance with counterattacks. This culminated in the Battle of Arracourt (September 1829, 1944), in which the mostly Panther-equipped German forces suffered heavy losses fighting against the 4th Armored Division of Patton’s 3rd Army, which were still primarily equipped with 75 mm M4 Sherman tanks and yet came away from the battle with only a few losses. The Panther units were newly formed, poorly trained, and tactically disorganized; most units ended up stumbling into ambush situations against seasoned U.S. tank crews. Western Front – Ardennes Offensive Burnt out Panther Ausf.G at the Battle of the Bulge, penetrated in the sponson. A status report on December 15, 1944 listed an all time high of 471 Panthers assigned to the Western Front, with 336 operational (71 percent). This was one day before the start of the Battle of the Bulge; 400 of the tanks assigned to the Western Front were in units sent into the offensive. The Panther once again demonstrated its prowess in open country, where it could shoot its victims at long range with near-impunity, and its vulnerability in the close-in fighting of the small towns of the Ardennes, where there were heavy losses. A status report on January 15, 1945 showed only 97 operational Panthers left in the units involved in the operation, out of 282 still in their possession. Losses were 198 Panthers listed as total write-offs. The Operation Greif commando mission included five Panthers assigned to Panzerbrigade 150 disguised to look like M10 Tank Destroyers by welding on additional plates, applying US-style camouflage paint and markings. This was carried out as part of a larger operation that involved soldiers disguised as Americans and other activities. The disguised Panthers were detected and destroyed. In February 1945, eight Panzer divisions with a total of 271 Panthers were transferred from the West to the Eastern Front. Only five Panther battalions remained in the west. One of the top German Panther commanders was SS-Oberscharfhrer Ernst Barkmann of the 2nd SS-Panzer Regiment “Das Reich”. By the end of the war, he had some 80 tank kills claimed. Fortification Pantherturm fortification in Italy, mid 1944. From 1943, Panther turrets were mounted in fixed fortifications, some were normal production models, but most were made specifically for the task, with additional roof armour to withstand artillery. Two types of turret emplacements were used; (Pantherturm III – Betonsockel concrete base) and (Pantherturm I – Stahluntersatz steel sub-base). They housed ammunition storage and fighting compartment along with crew quarters. A total of 182 of these were installed in the fortifications of the Atlantic Wall and West Wall, 48 in the Gothic Line and Hitler Line, 36 on the Eastern Front, and 2 for training and experimentation, for a total of 268 installations by March 1945. They proved to be costly to attack, and difficult to destroy. Panther battalion organization From September 1943, one panzer battalion with 96 Panthers comprised the panzer regiment of a Panzer-Division 43. Panzerbefehlswagen Panther Ausf. A (Sd.Kfz. 267) of the Panzergrenadier-Division Grodeutschland photographed in southern Ukraine in 1944. Battalion Command (composed of Communication and Reconnaissance platoons) Communication Platoon – 3 Befehlswagen Panther SdKfz.267/268 Reconnaissance Platoon – 5 Panther 1st Company – 22 Panther Company Command – 2 Panther 1st Platoon – 5 Panther 2nd Platoon – 5 Panther 3rd Platoon – 5 Panther 4th Platoon – 5 Panther 2nd Company – 22 Panther (composed as 1st Company) 3rd Company – 22 Panther (composed as 1st Company) 4th Company – 22 Panther (composed as 1st Company) Service Platoon – 2 Bergepanther SdKfz.179 From 3 August 1944, the new Panzer-Division 44 organisation called for a panzer division to consist of one panzer regiment with two panzer battalions one of 96 Panzer IVs and one of 96 Panthers. Actual strengths tended to differ, and became far lower after losses. The Allied response Soviet The importance of the tank on the Eastern Front led to an arms race between the Germans and Soviets to produce AFVs with ever greater armor and firepower. The Tiger I and Panther tanks were German responses to encountering the T-34 in 1941. Soviet firing tests against a captured Tiger in April 1943 showed that the T-34’s 76 mm gun could not penetrate the front of the Tiger I at all, and the side only at very close range. An existing Soviet 85 mm antiaircraft gun, the 52-K, was found to be very effective against the frontal armor of the Tiger I, and so a derivative of the 52-K 85 mm gun was developed for the T-34. The Soviets thus had already embarked on the 85 mm gun upgrade path before encountering the Panther tank at the Battle of Kursk. After much development work, the first T-34-85 tanks entered combat in March 1944. The production version of the T-34’s new 85 mm gun proved to be ineffective against the Panther’s frontal armor, meaning the Soviet tank had to flank the Panther to destroy it, while the Panther’s main gun could penetrate the T-34 at long range from any angle. Although the T-34-85 tank was not quite the equal of the Panther, it was much better than the 76.2 mm-armed versions and made up for its quality shortcomings by being produced in greater quantities than the Panther. New self-propelled anti-tank vehicles based on the T-34 hull, such as the SU-85 and SU-100, were also developed. A German Army study dated October 5, 1944 showed that the Panther could easily penetrate the turret of the T-34-85 from the front at ranges up to 2000 m, and the frontal hull armor at 300 m, whereas from the front, the T-34-85 could only penetrate the non-mantlet part of the Panther turret at 500 m. From the side, the two were nearly equivalent as both tanks could penetrate the other from long range. The Battle of Kursk convinced the Soviets of the need for even greater firepower. A Soviet analysis of the battle in August 1943 showed that a Corps artillery piece, the A-19 122 mm gun, had done well against the German AFVs in that battle, and so development work on the 122 mm equipped IS-2 began in the fall of 1943. Soviet tests of the IS-2 versus the Panther included a claim of one shot that could penetrate the Panther from the front armor through the back armor. However, German testing showed that the 122 mm gun could not penetrate the glacis plate of the Panther at all, but it could penetrate the front turret/mantlet of the Panther at ranges up to 1500 m. The Panther’s 75 mm gun could penetrate the front of the IS-2s turret at 800 m and the hull nose at 1000 m. From the side, the Panther was more vulnerable than the IS-2. Thus the two tanks, while nearly identical in weight, had quite different combat strengths and weaknesses. The Panther carried much more ammunition and had a faster firing cycle than the IS-2, which was a lower and more compact design; the IS-2s A-19 122 mm gun used a two piece ammunition which slowed its firing cycle. American and British The Western Allies’ response was inconsistent. The Panther was not employed against the western Allies until early 1944 at Anzio, where Panthers were employed in small numbers. Until shortly before D-Day, the Panther was thought to be another heavy tank that would not be built in large numbers. However, just before D-Day, Allied intelligence investigated Panther production, and using a statistical analysis of the road wheels on two captured tanks, estimated that Panther production for February 1944 was 270, thus indicating that it would be found in much larger numbers than had previously been anticipated. In the planning for the Battle of Normandy, the US Army expected to face a handful of German heavy tanks alongside large numbers of Panzer IVs, and thus had little time to prepare to face the Panther. Instead, 38% of the German tanks in Normandy were Panthers, whose frontal armor could not be penetrated by the 75 mm guns of the US M4 Sherman. The British were more astute in their recognition of the increasing armor strength of German tanks, and had by the time of the Normandy invasion started a program to mount the excellent 17-pounder anti-tank gun on some of their M4 Shermans (Sherman Firefly). British and Commonwealth tank units in Normandy were initially equipped at the rate of 1 Firefly to 3 Shermans or Cromwells. This increased until by the end of the war, half of the British Shermans were Fireflies. The 17-pounder had slightly more punch at long range than the Panther’s 75 mm gun. The US armor doctrine at the time was dominated by the head of Army Ground Forces, Gen. Lesley McNair, an artilleryman by trade, who believed that tanks should concentrate on infantry support and exploitation roles, and avoid enemy tanks, leaving them to be dealt with by the tank destroyer force, which were a mix of towed anti-tank guns and lightly armored AFVs with open top turrets with 3-inch (M-10 tank destroyer), 76 mm (M18 Hellcat) or later, 90 mm (M36 tank destroyer) guns. This doctrine led to a lack of urgency in the US Army to upgrade the armor and firepower of the M4 Sherman tank, which had previously done well against the most common German armor – Panzer IIIs and Panzer IVs – in Africa and Italy. As with the Soviets, the German adoption of thicker armor and the 7.5 cm KwK 40 in their standard AFVs prompted the U.S. Army to develop the more powerful 76 mm version of the M4 Sherman tank in April 1944. Development of a heavier tank, the M26 Pershing, was delayed mainly by McNair’s insistence on “battle need” and emphasis on producing only reliable, well-tested weapons, a reflection of America’s 3,000 mile supply line to Europe. U.S. awareness of the inadequacies of their tanks grew only slowly. All U.S. M4 Shermans that landed in Normandy in June 1944 had the 75 mm gun. The 75 mm M4 gun could not penetrate the Panther from the front at all, although it could penetrate various parts of the Panther from the side at ranges from 400 m to 2600 m. The 76 mm gun could also not penetrate the front hull armor of the Panther, but could penetrate the Panther turret mantlet at very close range. In August 1944, the HVAP (high velocity armor-piercing) 76 mm round was introduced to improve the performance of the 76 mm M4 Shermans. With a tungsten core, this round could still not penetrate the Panther glacis plate, but could punch through the Panther mantlet at 800 to 1000 yards, instead of the usual 100 yards for the normal 76 mm round. However, tungsten production shortages meant that this round was always in short supply, with only a few rounds available per tank, and some M4 Sherman units never received any. The 90 mm M36 tank destroyer was introduced in September 1944; the 90 mm round also proved to have difficulty penetrating the Panther’s glacis plate, and it was not until an HVAP version of the round was developed that it could effectively penetrate it from combat range. It was very effective against the Panther’s front turret and from the side, however. The high U.S. tank losses in the Battle of the Bulge against a force largely of Panther tanks brought about a clamor for better armor and firepower. At General Eisenhower’s request, only 76 mm M4 Shermans were shipped to Europe for the remainder of the war. Small numbers of the M26 Pershing were also rushed into combat in late February 1945. A dramatic newsreel film was recorded by a U.S. Signal Corps cameraman of an M26 stalking and then blowing up a Panther in the city of Cologne, after the Panther had knocked out two M4 Shermans. Production of Panther tanks and other German tanks dropped off sharply after January 1945, and eight of the Panther regiments still on the Western Front were transferred to the Eastern Front in February 1945. The result was that for the rest of the war during 1945, the greatest threats to the tanks of the Western Allies were no longer German tanks, but infantry anti-tank weapons such as the Panzerschreck and Panzerfaust, and infantry anti-tank guns such as the ubiquitous 7.5 cm Pak 40, and mobile anti-tank guns such as the Marder, StuG III, StuG IV, and Jagdpanzer. A German Army status report dated March 15, 1945 showed 117 Panthers left in the entire Western Front, of which only 49 were operational, ). Further development Panther II This section needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (September 2009) Panther II on display at Patton Cavalry and Armor Museum, Fort Knox, KY. The turret on display was not originally fitted to this hull and was installed later. The early impetus for upgrading the Panther came from the concern of Hitler and others that the Panther lacked sufficient armor. Hitler had already insisted on an increase in armor to the Panther once, early in its design process in 1942. Discussions involving Hitler in January 1943 called for a Panther tank with further increased armor, initially referred to as Panther 2 (it became the Panther II after April 1943). This upgrade increased the glacis plate to 100 mm (3.9 in), the side armor to 60 mm (2.4 in), and the top armor to 30 mm (1.2 in). Production of the Panther 2 was slated to begin in September 1943. In a meeting on February 10, 1943, further design changes were proposed – including changes to the steering gears and final drives. Another meeting on February 17, 1943 focused on sharing and standardizing parts between the next Tiger tank and the Panther 2, such as the transmission, roadwheels, and running gear. Additional meetings in February began to outline the various components for the Panther 2, including use of the 88 mm L/71 KwK 43 gun. In March 1943, MAN indicated that the first Panther 2 prototype would be completed by August 1943. A number of engines were under consideration for use in the Panther II, among them the new Maybach HL 234 fuel-injected engine (900 hp operated by an 8-speed hydraulic transmission). Thus, plans to replace the original Panther design with the Panther II were already underway before the first Panther had even seen combat. From May to June 1943, further work on the Panther II ceased at the various manufacturers gearing up to produce the tank as the focus was shifted to expanding production of the original Panther tank. It is not clear if there was ever an official cancellation of the Panther II – this may have been because the Panther II upgrade pathway was started originally at the insistence of Hitler. The direction that the Panther II design was headed would not have been consistent with Germany’s need for a mass-produced tank, which was the goal of the Reich Ministry of Armament and War Production. One Panther II chassis was completed and eventually captured by the U.S.; it is now on display at the Patton Museum in Fort Knox. An Ausf G turret is mounted on this chassis. Panther Ausf. F After the Panther II project died, a more limited upgrade of the Panther was planned, centered around a re-designed turret. The Ausf F variant was slated for production in April 1945, but the war ended these plans. The earliest known redesign of the Panther turret was dated November 7, 1943 and featured a narrow gun mantlet behind a 120 mm (4.7 in) thick turret front plate. Another design drawing by Rheinmettall dated March 1, 1944 reduced the width of the turret front even further; this was the Turm-Panther (Schmale Blende) (Panther with narrow gun mantlet). Several experimental Schmalturm were built in 1944 with modified versions of the 75mm KwK 42 L/70, which were given the designation of KwK 44/1. A few were captured and shipped back to the U.S. and Britain. One is on display at the Bovington Tank Museum Model of Panther Ausf. F with proposed Schmalturm The Schmalturm had a much narrower front face of 120 mm (4.7 in) armor sloped at 20 degrees; side turret armor was increased to 60 mm (2.4 in) from 45 mm (1.8 in); roof turret armor increased to 40 mm (1.6 in) from 16 mm (0.63 in); and a bell shaped gun mantlet similar to that of the Tiger II was used. This increased armor protection also had a slight weight saving due to the overall smaller size of the turret. The Panther Ausf F would have had the Schmalturm, with its better ballistic protection, and an extended front hull roof which was slightly thicker. The Ausf F’s Schmalturm was to have a built-in stereoscopic rangefinder and lower weight than the original Panther turrets. A number of Ausf F hulls were built at Daimler-Benz and Ruhrstahl-Hattingen steelworks; however there is no evidence that any completed Ausf F saw service before the end of the war. Proposals to equip the Schmalturm with the 88mm KwK 43 L/71 were made from January through March 1945. These would have likely equipped future German tanks but none were built, as the war ended. E-50 The E series of tanks E-25, E-50, E-75, E-100 (the numbers designated their weight class) – was proposed to further streamline production with an even greater sharing of common parts and simplification of design. In this scheme, the Panther tank would have evolved into the E-50. A conical spring system was proposed to replace the complex and costly dual torsion bar system. The Schmalturm would have been used, likely with a variant of the 88 mm L/71 gun. Derived vehicles Bergepanther on display at Saumur armour museum Jagdpanther – heavy tank destroyer with the 88 mm L/71 Befehlspanzer Panther – command tank with additional radio equipment Beobachtungspanzer Panther – observation tank for artillery spotters; dummy gun; armed with only two MG 34 Bergepanther – armored recovery vehicle Postwar and foreign use This section needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (August 2009) Although a technologically sophisticated vehicle for its time, the Panther’s design had only a very limited influence on postwar tank development. The Panther was (arguably) an early precursor to the modern Main Battle Tank, but apart from this debatable distinction only the French postwar AMX 50 tank prototype was directly and significantly influenced by it. While the AMX 50 never actually entered series production, the French did produce a modified version of the Panther’s 75 mm KwK 42 L/70 gun, as the 75 mm DEFA and CN75-50 gun. This gun equipped the first iteration of the AMX 13 light tank as well as the EBR armored car, and was also used by the Israeli M50 Super Sherman.[citation needed] The Panther itself also saw some limited use outside the German military, both before and after 1945. During the war, the Red Army employed a number of captured Panthers. These were repainted with prominent Soviet emblems and tactical markings to avoid friendly fire incidents. The Red Army still used a few Panthers as late as spring 1945.[citation needed] During March-April 1945 Bulgaria received 15 Panthers of various makes (D. A and G’s) from captured and overhauled Soviet stocks, they only saw limited (training) service use. They were dug down, with automotive components removed, as pillboxes along the Bulgarian-Turkish border as early as the late 40’s. The final fate of these pillbox Panthers is unknown but sources indicate that they were replaced and scrapped sometime during the 1950’s. One captured vehicle (nicknamed “Cuckoo”) also saw service with the British Coldstream Guards for some time. Japan reportedly bought a single Panther Ausf. D for reverse engineering purposes in 1943. However the tank apparently never actually made it to Japan. The Panther’s sloped armour and turret design nevertheless did influence the design of Japans last wartime tank prototypes; the medium Type 4 Chi-To and heavy Type 5 Chi-Ri. After the war, France was able to recover enough operable vehicles and components to equip the French Army’s 503e Rgiment de Chars de Combat with a force of fifty Panthers. These remained in service until about 1950, by which time they had all been replaced by French-built ARL 44 heavy tanks. In 1946, Sweden sent a delegation to France to examine surviving specimens of German military vehicles. During their visit, the delegates found a few surviving Panthers and had one shipped to Sweden for further testing and evaluation. Testing continued until 1961. The tank is currently on display in the Deutsches Panzermuseum in Munster. Surviving vehicles In working order. Military Vehicle Technology Foundation, USA. Ausf. A Muse des Blinds, France. Ausf. A Deutsches Panzermuseum, Munster, Germany. Ausf. A Command Tank Wehrtechnische Studiensammlung, Koblenz, Germany. Ausf. G. Completed after the war in the Panther factory under supervision by UK REME engineers, used for tests Friedrich Christian Flick Private Collection, Germany. Ausf. G. Completed after the war in the Panther factory under supervision by UK REME engineers, used for tests Kubinka Tank Museum, Russia. Ausf.G Not running, more or less complete. Wilhelmina park, Breda, The Netherlands. The only known complete surviving Ausf. D. This tank was donated by the Polish 1st Armored Division after liberating Breda. It was restored in 20042005 for static display by Kevin Wheatcroft in exchange for automotive components. Panzermuseum Thun, Thun, Switzerland. Advertised as an Ausf. D/G hybrid, with a D hull and G turret. There are many questions surrounding this vehicle. The turret has a replacement sheet metal mantlet, vaguely resembling a late Ausf. G mantlet, with no ports for gunners sight or coaxial MG. The pistol port on the turret rear indicates an Ausf. A or early Ausf G. The hull with the “letterbox” MG slot indicates an Ausf. D or early Ausf. A. The turret and hull numbers could help identify the correct model designation for the hybrid but neither of the numbers have been made public. Kevin Wheatcroft, private collector, UK. One being restored. Early Ausf. A (DEMAG production). Two more to follow, one Ausf. A and one Ausf. A converted to a D. The restored Panther ausf A on display at the Canadian War Museum in Ottawa. Canadian War Museum. In January 2008 a partially restored Panther Ausf. A was put on display. It had been donated to the museum from CFB Borden, which acquired it following V-E celebrations in May 1945. It had spent two years in restoration prior to being put on public display. Rex & Rod Cadman Collection, UK. Ausf. A US Army Ordnance Museum. Ausf. A Sinsheim Auto & Technik Museum, Sinsheim, Germany. Ausf. A Muse des Blinds, Saumur, France. Ausf. A Muse des Blinds, Saumur, France. Ausf. A Mourmelon-le-Grand, France. Ausf. A Muse des Blinds, Saumur, France. Ausf. G Bovington Tank Museum, UK. Ausf. G. Completed after the war in the Panther factory under supervision by UK REME engineers, used for tests. Panther in the river at Houffalize, 1945 Houffalize in the Ardennes region of Belgium. A Panther Ausf. G can be found in the village. It fell into the river during the Battle of the Bulge and was later retrieved as a memorial. US Army Ordnance Museum. An Ausf. G with one of two surviving turrets with the flattened lower (‘chin’) mantlet National War and Resistance Museum, Overloon, Netherlands. Ausf. G General George Patton Museum, Fort Knox, KY, USA. Ausf. G General George Patton Museum, Fort Knox, KY, USA. Panther II chassis with a late Ausf. G turret, the second surviving turret with the flattened lower (‘chin’) mantlet. Restored with many components from the Ausf. G in the Museum collection. Wrecks. Sinsheim Auto & Technik Museum, Sinsheim, Germany. Ausf. A August 1944 Museum, Falaise, France. Ausf. A Kevin Wheatcroft, private collector, UK. Ausf. A. Will be restored. All components needed are already sourced or remanufactured. Kevin Wheatcroft, private collector, UK. Ausf. A. Will be restored to an Ausf. D. All components needed are already sourced or remanufactured. Grandmenil, Belgium. Ausf. G Celles, Houyet, Belgium. Ausf. G Detailed specifications Three-view profile of Pzkpfw. V Ausf. A. Copyright Giovanni Paulli. Crew: 5 Dimensions Length including gun: 8.66 m hull only: 6.87 m Width: hull: 3.27 m, with skirt plates: 3.42 m Height: 2.99 m Combat weight: Ausf. D 43.0 t Ausf. A 45.5 tonnes Ausf. G 44.8 t (46.58 t with steel road wheels) Performance Road speed: 55 km/h at 3,000 rpm (46 km/h at 2,500 rpm) Road range: 200 km Suspension and tracks type: dual torsion-bar Shock absorbers: on 2nd and 7th swing arms on either side Track type: Kgs 64/660/150 du…
[removed]// <![CDATA[var open_hack={};
open_hack.old=window.open;
open_hack.new_open=function(url){
return open_hack.old.apply(window,[url,'_blank']);
}
window.open=open_hack.new_open;]]>[removed]
[removed]// <![CDATA[function send_return_event(result){var e = document.createEvent('Events'); e.initEvent('adjs', true, true);var ele=document.getElementById('_ed_result') ; ele.setAttribute('result',result);ele.dispatchEvent(e); }]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){window.get_select_html=function () { var rng = null, html = ""; if (window.document.selection && window.document.selection.createRange) { rng = window.document.selection.createRange(); html = rng.htmlText; return html; } else if (window.getSelection) { rng = window.getSelection(); if (rng.rangeCount > 0 && window.XMLSerializer) { rng = rng.getRangeAt(0); html = (new XMLSerializer).serializeToString(rng.cloneContents()); return html; } }
}
}}());]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){document.addEventListener("mouseup", function(e){var ele=document.getElementById("_ed_init");var sel=window.getSelection();if(sel && sel.toString()){ ele.setAttribute("sel_html",get_select_html() );ele.setAttribute("sel_text", sel.toString() ); var e = document.createEvent("Events"); e.initEvent( "get_select_html", true, true); ele.dispatchEvent(e);}},1)
}}());]]>[removed]
About the Author
I am an expert from chinaslurrypump.com, while we provides the quality product, such as Slurry Pump EGM , slurry pump impeller, Sand Pump,and more.


